Stator Suzuki DR 650 S 1990-1993

RM01354
Brand new stator Direct replacement to your original unit Plug-and-play, direct fit, easy installation. Highest grade lamination materials Highest grade copper windings, resistant to 200 degrees Celsius. Pick up pulsar coil included Connector included Rubber grommet included All product shipped are tested One year limited warranty *All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.Plug-and-Play / Direct Fit
€185.59
Tax included

 

Financing Available

 

Fast Delivery

 

Returns Process

Number of wires : 7 Number of terminals : 9 Alternator : White between White = 2.3 ohms+/- 20% Pick up : Blue to Green = 200 ohms+/- 20% Source Coil : Brown to Green = 300 ohms+/- 20% Interior Diameter: 58mm Exterior Diameter: 150mm Thickness: 40mmBefore installing your new stator Check the AC output of the stator. Replace any burned or corroded connectors on stator and regulator/rectifier Check and repair any melted wiring. Use hi-temp dielectric grease on all connectors Our stator may use a different wire color code than your original. All of the wires are installed in the correct order; please do not change any of the wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such. When bolting stator in, always use locking compound. If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
RM01354

Specific References

16 other products in the same category: