Stator Coil for Yamaha YFZ-R1 2009-14 | OEM 14B-81410-00-00

RMS010-100094
Brand new aftermarket stator Direct replacement to your original unit. Plug-and-play, direct fit, easy installation. Highest grade lamination materials. Highest grade copper windings, resistant to 200°C. Connector included. Rubber grommet included. All products shipped, are tested. 20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS. We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective & a major cause for repetitive electrical issues.   Used on the following applications: Yamaha YFZ-R1 (2009-14) YFZ-R1 LE (2010)   Replaces these genuine manufacturers part numbers: Yamaha
€207.06
Tax included

 

Financing Available

 

Fast Delivery

 

Returns Process

Unit Type Part Part Type STATOR COIL Dimensions Internal diameter: 43.4mm External diameter: 105mm Thickness: 16.5mm Length of wires: Stator to grommet: 100mm Grommet to plug: 1000mm Other Number of wires: 3 Number of plugs: 1 Number of pins: 4 Wire to wire resistance: Alternator = White to white = 0.4ohms +/-20% Brief Yamaha YFZ-R1 (2009-14) Installation Before installing your new stator Check the AC output of the stator. Replace any burnt or corroded connectors on the stator & regulator Check & repair any melted wiring. Use hi-temp dielectric grease on all connectors. Our stator may use a different wiring colour code to your original. All of the wires are installed in the correct order; please do not change any of the wiring configurations The stator is deisgned as a direct plug-in replacement & should be used as such. When bolting stator in, always use locking compound. If our stator includes as pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
RMS010-100094

Specific References

16 other products in the same category: