Aprilia RSV 1000 R RSV 1000 R Tuono Stator Coil | Replaces AP0685330

RM01445
Brand new aftermarket stator Direct replacement to your original unit Plug-and-play, direct fit, easy installation. Highest grade lamination materials Highest grade copper windings, resistant to 200 degrees Celsius. Connector included Rubber grommet included All products shipped are tested One year limited warranty Used on the following applications: Aprilia RSV 1000 R (2004-08) RSV 1000 R Tuono (2006-09) Replaces these genuine manufacturers part numbers: Aprilia AP0685330   For a full application / interchanges listing, please see our part Application / Fitment section below. All item pictures are accurate; if in doubt do not hesitate to com
€185.59
Tax included

 

Financing Available

 

Fast Delivery

 

Returns Process

  Unit Type Part Part Type STATOR COIL Voltage 12 Dimensions Internal diameter: 55mm Exterior diameter: 115mm Thickness: 24mm Length of wires stator to grommet: 100mm Length of wires grommet to plug: 950mm Other specifications: Number of Wires: 3 Number of plugs: 1 Number of pins: 3 Wire to wire resistance: Alternator: Yellow between each Yell = 0.4 ohms +/-20% Brief Used on: Aprilia RSV 1000 R 2004-08 Aprilia RSV 1000 R Tuono 2006-09 Installation Before installing your new stator   Check the AC output of the stator. Replace any burned or corroded connectors on stator and regulator/rectifier Check and repair any melted wiring. Use hi-temp dielectric grease on all connectors   Our stator may use a different wire color code than your original.  All of the wires are installed in the correct order; please do not change any of the wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such. When bolting stator in, always use locking compound. If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.
RM01445

Specific References

16 other products in the same category: