Stator Yamaha YZF R6 R6S 2003-2009

CLR 1 To CLR 2 Resistance Alternator : Yellow Yellow 0.3 ohms+/-20% Alternator : Yellow Ground O.L. ON DISPLAY Number of wires : 3 Number of plugs : 1 Number of terminals : 6 Inside diameter : 38.01 mm Outside diameter : 105.8 mm Thickness : 22 mmBefore installing your new stator Check the AC output of the stator. Replace any burned or corroded connectors on stator and regulator/rectifier Check and repair any melted wiring. Use hi-temp dielectric grease on all connectors Our stator may use a different wire color code than your original. All of the wires are installed in the correct order; please do not change any of the wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such. When bolting stator in, always use locking compound. If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".