Honda TRX420 Rancher FA | FPA Generator Stator | Replaces 31120-HP7-A01

RM01437
Brand new generator stator Direct replacement to your original unit Plug-and-play, direct fit, easy installation. Highest grade lamination materials Highest grade copper windings, resistant to 200 degrees Celsius. Pick up pulsar coil included Connector included Rubber grommet included All products shipped are tested One year limited warranty All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part. Used on Honda TRX 420 Rancher FA 2009 -2014   TRX 420 Rancher FPA 2009 -2014   Replaces the following OE reference numbers 31120-HP7-A00
€150.52
Tax included

 

Financing Available

 

Fast Delivery

 

Returns Process

Dimensions : Interior diameter : 42mm  Exterior diameter : 106mm  Thickness : 20mm  Length of wires stator to grommet : 100mm  Length of wires grommet to plug : 250mm  Length of pickup coil's wire to grommet : 80mm    Other specifications : Number of wires : 5  Number of plugs : 1  Number of pins : 5  Wire to wire resistance : Alternator : Yellow between each Yellow = 0.4ohms +/-20% Pickup : Blue to Green = 115ohms +/-20% Before installing your new stator Check the AC output of the stator. Replace any burned or corroded connectors on stator and regulator/rectifier Check and repair any melted wiring. Use hi-temp dielectric grease on all connectors Our stator may use a different wire color code than your original. ` All of the wires are installed in the correct order; please do not change any of the wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such. When bolting stator in, always use locking compound. If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.
RM01437

Specific References

16 other products in the same category: