Honda TRX250 TE TM Fourtrax Recon TM TE | Stator Coil | Replaces 31120-HM8-B00

Number of wires : 5  Number of plugs : 2  Number of terminals : 5  Harness length - Stator to grommet (mm) : 92  Harness length - Grommet to plug (mm) : 250  Pick-up coil wire length - Coil to grommet (mm) : 120  Inside diameter (mm) : 35  Outside diameter (mm) : 88  Thickness (mm) : 18 Alternator resistance (Yellow to Yellow) : 0.4 ohms +/- 20%  Source 1 resistance (Black/Red to Green) : 185 ohms +/- 20%  Pick-up 1 resistance (Blue/White to Green): 280 ohms +/-20% Before installing your new stator Check the AC output of the stator. Replace any burned or corroded connectors on stator and regulator/rectifier Check and repair any melted wiring. Use hi-temp dielectric grease on all connectors Our stator may use a different wire color code than your original.  All of the wires are installed in the correct order; please do not change any of the wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such. When bolting stator in, always use locking compound. If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".