Stator Coil for CF Moto CF500 Terralander 500 | OEM 0180-032000

RMS010-100032
Brand new aftermarket stator Direct replacement to your original unit Plug-and-play, direct fit, easy installation. Highest grade lamination materials. Highest grade copper windings, resistant to 200°C. Pick up pulsar coil included. Connector included. Rubber grommet included. All products shipped are tested. We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective & a major cause for repetitive electrical issues.   Used on the following applications: CF Moto Uforce 500 HO (2014-15) CF500 (2007-15) Terralander 500 EFI (2011-2014) Terralander 500 Carb (2012-13)   Replaces these gen
€103.84
Tax included

 

Financing Available

 

Fast Delivery

 

Returns Process

Unit Type Part Part Type STATOR COIL Voltage 12 Dimension Internal diameter: 54mm External diameter: 115mm Thickness: 18mm Length of wires stator to grommet: 114mm Length of wires grommet to plug: 85mm Length of pick up coil's wire to grommet: 560mm Other Number of wires: 5 Number of plugs: 2 Number of pins: 5 Wire to wire resistance: Alternator: White between each White = 0.4 ohms +/-20% Pickup: Blue to Green = 200 ohms +/-20% Brief CF Moto ATV & UTV (2007-15) Installation Before installing your new stator Check the AC output of the stator. Replace any burnt or corroded connectors on the stator & regulator Check & repair any melted wiring Use hi-temp dielectric grease on all connectors Our stator may use a different colour code to your original. All of the wires are installed in the correct order; please do not change any of the wiring configurations. This stator is designed as a direct plug-in replacement & should be used as such. When bolting the stator in, always use a locking compound. If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010"
RMS010-100032

Specific References

16 other products in the same category: