Stator KTM 1998-2016 (EXC MXC SX SXS XC XC-W)
  • Stator KTM 1998-2016 (EXC MXC SX SXS XC XC-W)

Stator KTM 1998-2016 (EXC MXC SX SXS XC XC-W)

RM01374
Brand new stator **Does not include the mounting plate or grommet *Please compare your original stator with our picture before buying, there is 2 possibles stators for some KTM models. *All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part. You must re-install your original connector and grommet (see picture). Once your connector and grommet is re-installed, our part becomes a Plug-and-play unit, direct fit, and very easy to install. Highest grade lamination materials Highest grade copper windings, resistant to 200 degrees Celsius. Pick up pulsar coil included Rubber grommet included Back Plate included All product shipped are tested One year limited warranty Minimal
€115.57
Tax included

 

Financing Available

 

Fast Delivery

 

Returns Process

Number of wires : 4 Interior Diameter : 28mm Exterior Diameter : 58 mm Thickness : 29 mm Alternator : Yellow To Yellow (resistance 0.7) Source 1 : Red To White (resistance 28)   Before installing your new stator Check the AC output of the stator. Replace any burned or corroded connectors on stator and regulator/rectifier Check and repair any melted wiring. Use hi-temp dielectric grease on all connectors Our stator may use a different wire color code than your original. All of the wires are installed in the correct order; please do not change any of the wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such. When bolting stator in, always use locking compound. If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
RM01374

Specific References

16 other products in the same category: