Yamaha FZ1 | FZ8 | YFZ-R1 Stator Coil | Replaces 2D1-81410-10-00

RM01303
Brand new generator stator Direct replacement to your original unit Plug-and-play, direct fit, easy installation. Highest grade lamination materials Highest grade copper windings, resistant to 200 degrees Celsius. Connector included Rubber grommet included All product shipped are tested One year limited warranty All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
€162.25
Tax included

 

Financing Available

 

Fast Delivery

 

Returns Process

Dimensions: Interior diameter: 18mm  Exterior diameter: 68mm  Thickness: 42mm  Length of wires stator to grommet: 125mm Length of wires grommet to plug: 500mm Other specifications: Number of wires: 3 Number of plugs: 1 Number of pins: 3 Wire to wire resistance: Alternator: = 0.4ohms +/-20% Before installing your new stator Check the AC output of the stator. Replace any burned or corroded connectors on stator and regulator/rectifier Check and repair any melted wiring. Use hi-temp dielectric grease on all connectors Our stator may use a different wire color code than your original. ` All of the wires are installed in the correct order; please do not change any of the wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such. When bolting stator in, always use locking compound. If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.
RM01303

Specific References

16 other products in the same category: