Stator Arctic Cat 1985-2005 (Bearcat Cheetah Cougar El Tigre EXT Jag Lynx and more

RM01300
Brand new stator Direct replacement to your original unit Plug-and-play, direct fit, easy installation. Highest grade lamination materials Highest grade copper windings, resistant to 200 degrees Celsius. Pick up pulsar coil included Connector included Rubber grommet included Back Plate included Adjustable timing plate to advance and retard up to 10 degrees included All product shipped are tested One year limited warranty Note : There are 2 possible stator for the OEM 3005-346, please compare your original part with our picture. We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues. *All item pic
€249.63
Tax included

 

Financing Available

 

Fast Delivery

 

Returns Process

Number of wires : 8 Number of terminals : 8 Alternator : Yellow to Yellow = 0.4 ohms+/-20% Source 1: Black/Red to Black/White = 180 ohms+/-20% Source 2 : White/Red to Black/Red = 17 ohms+/-20% Back is Ground Before installing your new stator Check the AC output of the stator. Replace any burned or corroded connectors on stator and regulator/rectifier Check and repair any melted wiring. Use hi-temp dielectric grease on all connectors Our stator may use a different wire color code than your original. All of the wires are installed in the correct order; please do not change any of the wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such. When bolting stator in, always use locking compound. If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
RM01300

Specific References

16 other products in the same category: