Stator Coil for Suzuki DR125 DR200 | OEM 32101-42A40

Unit Type Part Part Type STATOR COIL Voltage 12 Dimension Internal diameter: 35.52mm External diameter: 92.97mm Thickness: 16mm Length of wires: stator to grommet: 100mm grommet to plug: 900mm Length of pickup coil's wire to grommet: 100mm Mounting holes centre to centre: 30mm Other Number of wires: 5 Number of plugs: 2 Number of pins: 5 Wire to wire resistance: Alternator: Yellow to Yellow = 0.6ohms +/-20% Pickup: White/Green to White/Red = 100ohms +/-20% Brief Suzuki DR125SE DR200SE (1994-13) Installation Before installing your new stator Check the AC output of the stator. Replace any burnt or corroded connectors on the stator & regulator Check & repair any melted wiring. Use hi-temp dielectric grease on all connectors Our stator may use a different colour code to your original. All of the wires are installed in the correct ordered; please do not change any of the wiring confirgurations. The stator is designed as a direct plug-in replacement & should be used as such. When bolting the stator in, always use a locking compound. If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".