Filter By
New products
New products
-
Navimow H800E
€1,850.00 -
Navimow H1500E
€2,250.00 -
Navimow i Series i108
€1,950.00
Home
-
Toothed belt Li1118 (BX44...
€22.55Flail mower spare toothed belt, 2 pcs required for one flail mower. Flail mower part numbers these belts are suitable for DIESEL mower 27.7000 -
-
-
Front winch mounting kit:...
€87.95Front winch mounting kit for WARN, COMEUP or BRONCO winches with mounting bolt pattern 76x124mm (3"x4,87"). -
Cup washers: (50pcs / set):...
€27.06Special stamped washers set (50pcs) for IB skid plates! Inside ( hole ) diameter 8,4 mm / 0,33 in Outside diameter 37 mm / 1,45 in Height 7,5 mm / 0,3 in -
Rear winch mounting kit:...
€108.24Rear winch mounting kit for ATV winches with mounting bolt pattern 76x124mm (3"x4,87"). -
Cup washer
€0.68Special stamped washer for IB skid plates! Inside ( hole ) diameter 8,4 mm / 0,33 in Outside diameter 37 mm / 1,45 in Height 7,5 mm / 0,3 in -
Front-mount adapter: TGB...
€182.66Model-specific mounting adapter for Front-mount plow / V-Plow and bucket/push broom system. This only fits the LTX model version, for other Blade 1000 versions use p/n 03.8300 -
Wiring Harness & Switch...
€128.54Wiring harness & switch kit is required to connect and power up one electric cylinder( p/n 70.500 or 70.1000 ) with the 12V DC from the battery of the ATV / UTV. The kit consist of wiring harness (with 35A fuse), switch (for 1 cylinder), mounting hardware and installation manual. Length of the wiring harness is 6000mm - 3000mm in between switch and battery connectors and 3000mm in between switch and the cylinder. -
Wiring Harness & Switch...
€155.60Wiring harness & switch kit is required to connect and power up two electric cylinders( p/n 2 x 70.500 or 2 x 70.1000 ) with the 12V DC from the battery of the ATV / UTV. The kit consist of wiring harness (with 35A fuse), switches (for 2 cylinders), mounting hardware and installation manual. Length of the wiring harness is 5800mm - 3000mm in between switch and battery connectors and 2800mm in between switch and the cylinders. -
Rod point, set
€27.06Spare parts for installation: 20.6200 Front-mount 20.6400 Front-mount, narrow. -
Al. Front A-arm guards...
€169.13Front arm guards - suitable only for the dual arched / high clearance arms!