Filter By
New products
New products
-
Navimow H800E
€1,850.00 -
Navimow H1500E
€2,250.00 -
Navimow i Series i108
€1,950.00
Home
-
Universal spreader 57L:...
€713.40Prototype product / test used. Clearance -33% offer from retail price. Spreader / gritter with universal ATV and UTV fitment for rear racks or 2" hitch receivers. Capacity 57 L ( 15 gal ). Spread width 6-9 m ( 20 - 30 ft ). Ideal for farming, hunting, landscaping and ground maintenance. Spreads free-flowing materials such as sand, salt, seed, feed or fertilizer. -
Lawn Aerator: ( Quadivator...
€417.17Water filled Aerator. The drum spikes easily penetrate the toughest ground to create a healthier lawn. Optional extra tool for the main unit of Quadivator Cultivator ( 86200-08 ) p/n 63.0000, not supplied with this product, required additionally. -
Toothed belt Li1118 (BX44...
€22.55Flail mower spare toothed belt, 2 pcs required for one flail mower. Flail mower part numbers these belts are suitable for DIESEL mower 27.7000 -
-
-
Cup washer
€0.68Special stamped washer for IB skid plates! Inside ( hole ) diameter 8,4 mm / 0,33 in Outside diameter 37 mm / 1,45 in Height 7,5 mm / 0,3 in -
Front-mount adapter: TGB...
€182.66Model-specific mounting adapter for Front-mount plow / V-Plow and bucket/push broom system. This only fits the LTX model version, for other Blade 1000 versions use p/n 03.8300 -
Wiring Harness & Switch...
€128.54Wiring harness & switch kit is required to connect and power up one electric cylinder( p/n 70.500 or 70.1000 ) with the 12V DC from the battery of the ATV / UTV. The kit consist of wiring harness (with 35A fuse), switch (for 1 cylinder), mounting hardware and installation manual. Length of the wiring harness is 6000mm - 3000mm in between switch and battery connectors and 3000mm in between switch and the cylinder. -
Wiring Harness & Switch...
€155.60Wiring harness & switch kit is required to connect and power up two electric cylinders( p/n 2 x 70.500 or 2 x 70.1000 ) with the 12V DC from the battery of the ATV / UTV. The kit consist of wiring harness (with 35A fuse), switches (for 2 cylinders), mounting hardware and installation manual. Length of the wiring harness is 5800mm - 3000mm in between switch and battery connectors and 2800mm in between switch and the cylinders. -
Rod point, set
€27.06Spare parts for installation: 20.6200 Front-mount 20.6400 Front-mount, narrow. -
Al. Front A-arm guards...
€169.13Front arm guards - suitable only for the dual arched / high clearance arms! -
Cable extensions (3...
€33.83Extension cables (3 meters) for electric cylinders wiring harness / switch kits (p/n 70.2500 and 70.2600).