Stator Coil for CF Moto CF500 Terralander 500 | OEM 0180-032000
€88.65
Brand new aftermarket stator
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200°C.
Pick up pulsar coil included.
Connector included.
Rubber grommet included.
All products shipped are tested.
We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective & a major cause for repetitive electrical issues.
Used on the following applications:
CF Moto
Uforce 500 HO (2014-15)
CF500 (2007-15)
Terralander 500 EFI (2011-2014)
Terralander 500 Carb (2012-13)
Replaces these gen
1 in stock
Description
Unit Type
Part
Part Type
STATOR COIL
Voltage
12
Dimension
Internal diameter: 54mm
External diameter: 115mm
Thickness: 18mm
Length of wires stator to grommet: 114mm
Length of wires grommet to plug: 85mm
Length of pick up coil’s wire to grommet: 560mm
Other
Number of wires: 5
Number of plugs: 2
Number of pins: 5
Wire to wire resistance:
Alternator: White between each White = 0.4 ohms +/-20%
Pickup: Blue to Green = 200 ohms +/-20%
Brief
CF Moto ATV & UTV (2007-15)
Installation
Before installing your new stator
Check the AC output of the stator.
Replace any burnt or corroded connectors on the stator & regulator
Check & repair any melted wiring
Use hi-temp dielectric grease on all connectors
Our stator may use a different colour code to your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement & should be used as such.
When bolting the stator in, always use a locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010″
Reviews
There are no reviews yet.