Honda TRX250 TE TM Fourtrax Recon TM TE | Stator Coil | Replaces 31120-HM8-B00
€138.51
Brand new stator
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials
Highest grade copper windings, resistant to 200 degrees Celsius.
Connector included
Rubber grommet included
All product shipped are tested
One year limited warranty
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Used on
Honda
TRX 250 Recon TE
2005
-2009
TRX 250 Recon TE
2011
-2014
TRX 250 Recon TM
2005
-2009
TRX 250 Reco
Out of stock
Description
Number of wires : 5
Number of plugs : 2
Number of terminals : 5
Harness length – Stator to grommet (mm) : 92
Harness length – Grommet to plug (mm) : 250
Pick-up coil wire length – Coil to grommet (mm) : 120
Inside diameter (mm) : 35
Outside diameter (mm) : 88
Thickness (mm) : 18
Alternator resistance (Yellow to Yellow) : 0.4 ohms +/- 20%
Source 1 resistance (Black/Red to Green) : 185 ohms +/- 20%
Pick-up 1 resistance (Blue/White to Green): 280 ohms +/-20%
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010″.
Reviews
There are no reviews yet.