Aprilia RSV 1000 R RSV 1000 R Tuono Stator Coil | Replaces AP0685330
€158.43
Brand new aftermarket stator
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials
Highest grade copper windings, resistant to 200 degrees Celsius.
Connector included
Rubber grommet included
All products shipped are tested
One year limited warranty
Used on the following applications:
Aprilia
RSV 1000 R (2004-08)
RSV 1000 R Tuono (2006-09)
Replaces these genuine manufacturers part numbers:
Aprilia
AP0685330
For a full application / interchanges listing, please see our part Application / Fitment section below.
All item pictures are accurate; if in doubt do not hesitate to com
Out of stock
Description
Unit Type
Part
Part Type
STATOR COIL
Voltage
12
Dimensions
Internal diameter: 55mm
Exterior diameter: 115mm
Thickness: 24mm
Length of wires stator to grommet: 100mm
Length of wires grommet to plug: 950mm
Other specifications:
Number of Wires: 3
Number of plugs: 1
Number of pins: 3
Wire to wire resistance:
Alternator: Yellow between each Yell = 0.4 ohms +/-20%
Brief
Used on:
Aprilia RSV 1000 R 2004-08
Aprilia RSV 1000 R Tuono 2006-09
Installation
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.
Reviews
There are no reviews yet.