Generator Stator | Honda | TRX400 | FA Auto Rancher

Description

Dimensions :
Interior diameter : 35mm 
Exterior diameter : 93mm 
Thickness : 22mm 
Length of wires stator to grommet : 40mm 
Length of wires grommet to plug : 95mm & 400mm 
 

Other specifications :
Number of wires : 5 
Number of plugs : 1 
Number of pins : 5 

Wire to wire resistance :
Alternator : Yellow between Each Yellow = 0.4ohms +/-20%
Source : Green to Ground = 0.2ohms +/-20%

Before installing your new stator

Check the AC output of the stator.

Replace any burned or corroded connectors on stator and regulator/rectifier

Check and repair any melted wiring.

Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original. 
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.