Arctic Cat TRV400 | TRV450 | TRV500 Generator Stator | Replaces 3323-200
€78.74
Brand new generator stator
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included
Connector included
Rubber grommet included
All products shipped are tested
One year limited warranty
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Used on
Arctic Cat
TRV 400
2010
-2014
TRV 450
2011
-2012
TRV 500
2013
-2015
 
Out of stock
Description
Dimensions :
Interior diameter : 54mm
Exterior diameter : 114mm
Thickness : 18mm
Length of wires stator to grommet : 140mm
Length of wires grommet to plug : 320mm
Length of pickup coil’s wire to grommet : 95mm
Other specifications :
Number of wires : 7
Number of plugs : 2
Number of pins : 7
Wire to wire resistance :
Alternator : Black between each Black = 0.4ohms +/-20%
Pickup : Blue to Green = 100ohms +/-20%
Position Sensor : White to Yellow = 0.2ohms +/-20%
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original. `
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.
Reviews
There are no reviews yet.